Double Conversion On-Line UPS

• True online, double conversion UPS provides pure sine wave AC output at all times
• Maintains continuous operation through blackouts, voltage fluctuations and surges with zero transfer time to battery
• Removes harmonic distortion, electrical impulses, frequency variations and other hard-to-solve power problems
• Accepts input voltages between 130 and 275V (between 160 and 275V at loads over 70%), regulating output to 200/208/220/230/240V +/-2%
• 1500VA / 1200 watt power capacity with 6 IEC-320-C13 output receptacles
• IEC320-C14 input connection accepts a variety of detachable cordsets to match country or site-specific wall receptacles
• 2 C13 to C14 output power cables included
• Standard internal battery set provides 12 minutes runtime at half load and 4.5 minutes runtime at full load
• Optional BP48V24-2U (limit 1), BP48V60RT-3U (multi-pack compatible) and BP48V27-2US (multi-pack compatible) external battery packs
• Intelligent battery management system extends battery life
• Some external battery configurations require the use of Tripp Lite’s External Battery Configuration Software (see manual)
• Highly efficient operation in optional Economy Mode setting, saving BTU heat output and energy costs.
• Innovative design makes unit adaptable to rackmount, tower, or stacking applications
• Uses only 2 rack spaces (2U) in standard 19-inch rack
• Optional 2-9USTAND kit enables upright tower placement
• Optional 2POSTRMKITWM enables 2-post rackmount or wallmount installation
• Supports simultaneous communications via built-in USB port, DB9 serial port and slot for network management card options
• HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X
• Compatible with Tripp Lite UPS management card options TLNETCARD, WEBCARDLX, SNMPWEBCARD, MODBUSCARD and RELAYIOCARD
• USB & Serial ports enable data-saving unattended shutdown when used with Tripp Lite’s PowerAlert software, available via FREE download from www.tripplite.com/poweralert
• Compatible with Tripp Lite’s WatchDog software
• Fault tolerant electronic bypass maintains utility output during a variety of UPS fault conditions
• Optional PDUBHV10 bypass PDU enables hot-swappable UPS replacement with no disruption to connected equipment
• Built-in Emergency Power Off (EPO) interface with cable
• Single-line tel/DSL or Ethernet network surge suppression
• Integrated 2-bank switched PDU enables remote outlet management for load shedding or remote reboot of individual load banks (each bank has 3 outlets)

N+1 configuration: If maintenance is required, three self-contained, redundant 20kVA power modules
can be hot-swapped with the load remaining powered

1+1 configuration: Two SU60KX can be connected in parallel to provide either fail-safe redundancy or
increased capacity
High input power factor, advanced IGBT inverter technology and Digital Signal Processor (DSP)
technology produce low input total harmonic distortion (THDi)
Low THDi (less than 3%) reduces installation costs by allowing 1:1 generator sizing
Extremely efficient operation (up to 97%) saves money by reducing electricity consumption
True on-line, double-conversion UPS with IGBT technology provides pure sine wave AC output at all
times
Maintains continuous operation with zero transfer time through blackouts, voltage fluctuations and
surges
●
Removes harmonic distortion, electrical impulses, frequency variations and other hard-to-solve power
problems
60,000VA/48,000W power capacity with 3-phase, hardwire input/output connections
Wide input voltage correction range: 173-300V/276-477V AC
Precision +/-1% output voltage regulation
Battery modules (Models BP480V26B and BP480V40C) are housed in a separate, stand-alone
hardwired external battery compartment (required for UPS operation/backup battery support; order
separately)
Battery runtime can be extended with additional stand-alone hardwired external battery modules
(Models BP480V26B and BP480V40C; order separately)
Front panel combination LCD/LED display includes a real-time event log screen with up to 500 events
listed
Dynamic battery management screen optimizes battery function to lengthen service life and allow cold
restart of the UPS
Serial port enables data-saving unattended shutdown when used with Tripp Lite’s PowerAlert software,
available via FREE download from www.tripplite.com/poweralert
Compatible with Tripp Lite UPS management card options TLNETCARD, WEBCARDLX,
SNMPWEBCARD, MODBUSCARD and RELAYIOCARD
Emergency Power Off button turns UPS output OFF and disables Bypass output
Built-in Emergency Power Off (EPO) dry-contact interface supports remote emergency shutdown in large facilities